BFLY - Polar X - Silver

With the PolarX absorbers, we have significantly refined our multi-layer technology, abbreviated MLA.

The newly developed conductor is located on the top of the PolarX.

This conductor absorbs the vibrations from the device and directs them via a special fine thread into the corpus, where they are filtered through multiple stages and thus eliminated.

The black POM ring prevents unwanted interaction between the conductor and the corpus.

Possible Uses:

• Under the device feet
• Directly under the base plate of the Hi-Fi device.
  There are versions of the PURE in a tall design for this.
  Available in aluminum or black.

You can use 3 or 4 PolarX absorbers.
When using three, make sure that the individual PolarX is not placed on the heavy side of the device.
The effect of the PolarX is an audibly increased resolution and plasticity, while maintaining the usual natural sound.

Sound Tuning by Changing the Conductors

Each PolarX comes with a POM conductor. If you replace the POM conductor with a metal version on just one PolarX, you will get a slightly softer, more analog sound. This effect can be gradually enhanced by swapping the conductors on the other PolarX units one by one. This gives you the opportunity to fine-tune the sound very precisely to your needs.

The metal conductor is available in aluminum or copper.
Copper provides a slightly earthier and more natural sound.

The conductor has a spike holder on top, so it can also be used with devices that have spikes.

Our new PolarX absorbers have a very tight encapsulation of the absorber levels. The physical effect is improved horizontal stabilization in the room sound area. Lateral vibrations, usually caused by the loudspeakers, are thus eliminated even more effectively.

Especially for turntables and CD players (i.e., mechanical components), we achieve even greater calmness in the soundstage.

Available in aluminum, copper, or black.

The complex structure of the PolarX consists of 8 elements made from 6 different materials.
These are distributed over 8 levels in a special arrangement according to our proprietary MLA technology. This allows us to achieve a very broad-band filtering of vibrations.

The material Sorbothane, which is well-known in the HIGHEND sector, makes a significant contribution to improving the sound. You can learn more about our absorber material Sorbothane and our MLA technology here.

The music seems more relaxed, more spatial, and therefore more natural.

Placement Recommendation

For sound reasons, we recommend positioning the absorbers directly under the base of the device.

For devices with equal weight distribution, we recommend using 4 PolarX. Distributed in a trapezoidal shape if possible. see sketch on the right
For devices with uneven weight distribution, we recommend using 3 PolarX. The single PolarX must be on the lighter side.
If the individual absorber is placed under the heavy side, it could be overloaded. Unless you choose a PolarX with a higher load capacity for the heavy side. In the case on the right at the bottom of the sketch, a PolarX with 10 kg would be suitable.

Absorber 1 unit

• Diameter: 44 mm
• Height: adjustable from 26 mm to 31 mm

Delivery Includes:

• 1 PolarX absorber
  (choose between aluminum or copper conductor)
• 1 POM conductor for sound tuning

Prices per unit:

• Aluminum conductor
  Additional charge for copper conductor: 50€