Used Reduced price!
KINKI STUDIO - EX B-7

KINKI STUDIO - EX B7 - Silver - USED

Price for a pair

Model used for our audito and customer tests

Fair condition - some signs of wear and an impact at the bottom of a block (see photos available on request)

Colour: Silver

Price per pair

More details

In stock, immediate shipment

3 500,00 € tax incl.

-595,00 €

4 095,00 € tax incl.

Add to wishlist

The EX Series is tuned to reproduce sound quality with balance mid and smooth extension in both ends, high and low extension. The EX-B7 is the statement monoblocks power amp. Each monoblock is equiped with a 750VA UK Made Amplimo Toroidal Transformer, 4 pairs of EXICON Laterals MOSFET and a huge power reservoir capacitors farm. It is essential doubled of what the award-winning EX-M1 offered. The good of EX-M1 remains, rich in tonal quality, details, dynamic, and high resolutions.

WHAT'S MORE?

What's more? Compare to the Integrated EX-M1, EX-B7' power delivery, headroom, dynamic range, are incredible. Simply pair with its natural mate EX-P7 preamp, you are all set of a premium amplification for your difficult-to-drive loudspeakers.

COST-NO-OBJECT

The EX-B7 uses extremely high cost 0.2µm gold-plated printed circuit board (PCB). From the perspective of PCBs, it is clear that the designer is well aware of the limitations on the fine contact area of the general circuit board, specifically increasing the soldered area at each solder joint and adding as much shielding as possible. 

250Watts RMS into 8Ω

Right, we are being conservative. The monos can technically deliver a lot higher watts than what is stated. We do not want to get into the number games. We trust you as the smart consumer, you are not looking at just the number. The design, choice of components, tuning, is the key of good sounds.

SOUND CHARACTERISTIC

Neutrality and musicality were the goals to achieve. Rich tonal quality, vivid sound imaging, details, high resolution and dynamic. The choice of the components, design, and tuning does just that.  

It is the Kinki Studio gears' sound signature.

Parameters

  • Frequency Response: 0-2.5MHz (±3dB)
  • THDN: <0.05% (-80db)
  • S/N Ratio: >110db(0.01Hz- 1 MHz), >130db (A-Weighted)
  • Output Power: 250 W RMS(2-8 Ohms)
  • Max Instantaneous Power: 400w RMS (8 Ohms)
  • Max Output Voltage: 84VAC, 20A
  • Slew Rate: 200 V /us (Rise Time < 300ns)
  • AC Power: 110/240VAC, 50/60Hz (Factory configure).
  • Power Consumption: 30W Idle, 600W Max Output

Input / Output

  • Input Sensitivity: 1.45Vrms
  • Input Impedance: 51kΩ (Acceptable Range 10k-52kΩ)
  • Input Connector: RCA x 1, XLR x 1
  • Output: Speaker Binding Post 4mm L/R Channel

Dimension & Weight

  • Dimension: 330D x 230W x 190H
  • Weight: 17KG

4 other products in the same category: